FROGLUBE® is a cutting edge biodegradable lubricant made from "USDA Certified Food-Grade". All ingredients are produced in the USA using a proprietary formula. It is a non-toxic substance that dissolves carbon on contact. It has a heavy specific gravity, which enables it to 'season' the metal by absorption deep into the pores. Using FROGLUBE® results in a durable dry slick wax-like surface that reduces friction, eliminates fouling, and destroys rust. FROGLUBE® is safe for plastic, urethane, nylon, and wood. FROGLUBE®will give your weapon many extended years of service.

FROGLUBE® will not harm the environment. It can be disposed of without the need for prohibitive HAZMAT controls. Employees will be protected from the affects of working in and around toxic chemicals.



FrogLube 8oz. Liquid CLP

  • Directions for Use: The following procedure should help you reduce your maintenance time and frequency intervals to insure the full, long-lasting performance of your weapon. You should use standard weapons cleaning tools such as nylon brushes, bore patches and brushes, Q-tips, bore snakes and cloths. Since FrogLube is 100% biodegradable, you can select a premium grade cloth which you may launder in a washer and dryer. FrogLube recommends laundering separately. When used in accordance with these instructions, FrogLube delivers a slick and slippery finish that shoots dry, wicks to the surface when warmed and dissolves carbon on contact. Preparation Your new weapon is likely factory-treated with a lubricant or protectant of a petro-chemical substance or you may have used a petrochemical or other substances on your weapon. For your first application: for best performance, it is preferred to remove any petro-chemicals from your weapon using FrogLube Super Degreaser (or equivalent) prior to applying FrogLube. If pre-cleaning is not practical or desired, FrogLube will penetrate and eventually dissolve corrosive petrochemical present on the weapon. Clean ALL surfaces with FrogLube cleaning products - FrogLube cleaners and degreasers do not leave any residue. NOTE: You should eliminate the use of petrochemical-based cleaners and lubricants of a different chemistry since they negate the affects of a FrogLube-treated weapon. Application / Treatment For best results, the metal should be warmed. 15 min of direct sunlight is long enough to allow for thorough warming. When the metal is warmed, the rate of FrogLube absorption is increased. Treatment: Apply a sufficient amount of paste or liquid to warmed metal and all operating parts. Apply a generous amount to a bore brush and vigorously scrub the bore. Allow time for FrogLube to penetrate. FrogLube penetrates the metal pores of cleaned parts and establishes a foothold on-and-beneath the metal surface. Wipe off excess.